, 4 min read
ASRock DeskMini A300M with AMD Ryzen 3400G
Below are some photographs during assembly of the Asrock A300M with an AMD Ryzen 5 Pro 3400G processor.
The Asrock website detailing the specs of the A300M: DeskMini A300 Series. The specs are as in below table.
| Type | Value |
|---|---|
| CPU | - Supports AMD AM4 Socket CPUs (Picasso, Raven Ridge, Bristol Ridge, up to 65W) |
| Chipset | - AMD A300 |
| Cooler | - Supports AMD AM4 CPU Cooler (Max. Height ≦ 46mm) |
| Memory | - Supports 2 x SO-DIMM DDR4, Max. 64GB (non-ECC) - Ryzen APU - DDR4-2933MHz - A-series APU - DDR4-2400MHz |
| Graphics | - Integrated AMD Radeon™ Vega Series Graphics in Ryzen Series APU - Integrated AMD Radeon™ R-Series Graphics in A-series APU |
| Graphics Output | - 1 x HDMI (4K@60Hz) - 1 x DisplayPort (4K@60Hz) - 1 x D-Sub |
| Audio | - 1 x Head Phone with Mic Jack - 1 x Mic-In - Realtek ALC233 |
| Front USB | - 1 x USB 3.1 Gen1 Type-C - 1 x USB 3.1 Gen1 Type-A |
| Rear USB | - 1 x USB 3.1 Gen1 Type-A - 1 x USB 2.0 Type-A |
| Storage | - M.2_1: Type 2280 PCIe Gen3 x4 - M.2_2: Type 2280 PCIe Gen3 x4* - 2 x SATA 6Gb 2.5-inch 7mm/9.5mm Hard Drive (RAID 0/1) *Athlon 2xxGE series APU - PCIe Gen3 x2 |
| LAN | - 1 x RJ45 Gigabit LAN - Realtek RTL8111H |
| WLAN | - 1 x M.2 (key E 2230) Slot for Wi-Fi + BT Module |
| Connectors | - 1 x USB 2.0 Header - 1 x Front Panel Header - 2 x 4-Pin Fan Connectors - 1 x DC-In Jack (Supports 19V Power Adapters) - 1 x 4-Pin Audio Header - 1 x 2-Pin Chassis Intrusion Header |
| Power Unit | - 120W/19V Adapter |
| Accessory | - 2 x SATA Data with Power Cable - 1 x Screws Pack |
| Dimension | - Motherboard: 5.8" x 5.4" (Mini-STX) - Barebones: 155 x 155 x 80 mm (1.92L) |
| Security | - Kensington Lock - Key Lock |
| Certification | - CE, FCC - TPM Software |
Three noticable reviews on the A300M:
- Anandtech has a very readable review of the A300M: Home> Systems The ASRock DeskMini A300 Review: An Affordable DIY AMD Ryzen mini-PC
- A short review from Techspot: Asrock DeskMini A300 Review.
- A German review with many photos during assembly: ASRock DeskMini A300 mit AMD Ryzen 5 2400G im Test.
1. CPU. Three photos from the AMD 3400G CPU:
2. Power. The power supply of the A300M will provide at most 19V x 6.32A = 120W.
3. Dimensions. The case has volume of at most two liters, exemplified by the two milk cartons.
4. Mounting. CPU mounted on motherboard.
5. Temperature. I installed a Noctua NH-L9a-AM4 cooler. Running the AMD at full speed with full load shows the following temperature using command sensors:
amdgpu-pci-0300
Adapter: PCI adapter
vddgfx: N/A
vddnb: N/A
edge: +85.0°C (crit = +80.0°C, hyst = +0.0°C)
k10temp-pci-00c3
Adapter: PCI adapter
Vcore: 1.23 V
Vsoc: 1.07 V
Tctl: +85.2°C
Tdie: +85.2°C
Icore: 100.00 A
Isoc: 9.00 A
nvme-pci-0100
Adapter: PCI adapter
Composite: +57.9°C (low = -0.1°C, high = +74.8°C)
(crit = +79.8°C)
nct6793-isa-0290
Adapter: ISA adapter
in0: 656.00 mV (min = +0.00 V, max = +1.74 V)
in1: 1.86 V (min = +0.00 V, max = +0.00 V) ALARM
in2: 3.41 V (min = +0.00 V, max = +0.00 V) ALARM
in3: 3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in4: 328.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in5: 216.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in6: 448.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in7: 3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in8: 3.30 V (min = +0.00 V, max = +0.00 V) ALARM
in9: 1.84 V (min = +0.00 V, max = +0.00 V) ALARM
in10: 256.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in11: 216.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in12: 1.86 V (min = +0.00 V, max = +0.00 V) ALARM
in13: 1.71 V (min = +0.00 V, max = +0.00 V) ALARM
in14: 272.00 mV (min = +0.00 V, max = +0.00 V) ALARM
fan1: 0 RPM (min = 0 RPM)
fan2: 2626 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +97.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor
CPUTIN: +87.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor
AUXTIN0: +62.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
AUXTIN1: +94.0°C sensor = thermistor
AUXTIN2: +90.0°C sensor = thermistor
AUXTIN3: +86.0°C sensor = thermistor
SMBUSMASTER 0: +85.0°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
intrusion0: OK
intrusion1: ALARM
beep_enable: disabled
Fully loaded:
1 [|||||||||||||||||||||||||||||||||||||||| 52.9%] Tasks: 120, 405 thr; 5 running
2 [||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||99.4%] Load average: 7.28 6.82 6.02
3 [||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||99.4%] Uptime: 8 days, 07:27:51
4 [||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||94.1%]
5 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%]
6 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| 88.2%]
7 [||||||||||||||||||||||||||||||||| 44.2%]
8 [||||||||||||||||||||||||||||||||||||||| 50.6%]
Mem[||||||||||||||||||||||||||||||||||||||||||||||||||||||| 28.7G/60.8G]
Swp[ 0K/0K]
6. Cost breakdown. I bought case and CPU from Mindfactory, fan and SSD from Alternate, RAM from Amazon. At that time during the CoVID pandemic hardware was not easily available.
| Part | # | Single/€ | Sum/€ |
|---|---|---|---|
| ASRock DeskMini A300 Ryzen HDMI/DP/D-Sub | 1 | 138.80 | 138.80 |
| Noctua NH-L9a CPU fan | 1 | 39.99 | 39.99 |
| AMD Ryzen 5 3400G 4x 3.70GHz So.AM4 Tray | 1 | 159.90 | 159.90 |
| 32GB Crucial CT32G4SFD8266 DDR4, 2666 MT/s, SODIMM, 260-Pin, 1.2V, CL19 | 2 | 161.26 | 322.52 |
| SSD 2TB 3.0/3.1G Viper VPN100 M.2 PAT | 1 | 329.00 | 329.00 |
| 990.21 |
Added, 22-Aug-2020: I noticed that the A300M motherboard has a very significant clock lag. So you are requried to run ntpdate or timesyncd.